T605 wheelchair scale after-sales problem - Database & Sql Blog Articles

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Inductance

T605

Wheelchair Scale After-Sales Issues

With the increasing number of wheelchair scales in hospital dialysis rooms, the cost-effectiveness of our product is highly valued. Today, we'll discuss some common mistakes and troubleshooting tips for wheelchair scales.

1. Err 2: The A/D value is higher than the normal range, which may indicate a fault in the instrument.

If you unplug the sensor and the error message clears, it likely means the sensor is faulty. If the error remains, the meter itself might be at fault.

2. Err 3: Indicates that the boot zero is not functioning properly.

3. Err 4: Suggests that the zero calibration or A/D value is too low.

4. Err 5: Indicates that the span calibration has failed.

5. Err 6: Means the weighing is unstable.

6. OUEr: This error shows that the weight exceeds the maximum capacity.

If unplugging the sensor clears the error, the sensor is likely faulty. If not, the meter may be the issue.

7. Err E: Indicates a problem with the instrument's memory.

8. Err 1: The A/D value is below the normal range, which could point to a problem with the instrument or sensor.

If unplugging the sensor clears the error, the sensor is at fault. If not, the meter may need attention.

If the A/D is working correctly, the maximum weight setting might be incorrect. Resetting or recalibrating the device can help restore normal function.

We specialize in the production and sales of various types of electronic scales, including:

Electronic platform scale, electronic truck scale, cylinder scale, forklift scale, wheelchair scale, roller scale.

Welcome to our official website: http://