Government funds strongly support local LED market will double in 2014

According to iSuppli, China's light-emitting diode (LED) market will double between 2009 and 2014, driven by government subsidies and market demand for LCD TVs and total lighting.

Before 2014, LED revenue in China will reach 7.1 billion US dollars, compared with the revenue of 3.4 billion US dollars in 2009, the annual growth rate is 12.8%. Ultra-high brightness (UHB) LED will grow especially fast. The revenue increased from $686 million in 2010 to an estimated $1.8 billion in 2014.

The trend of LED revenues in China from 2009 to 2014 in iSuppli's forecast report.

VincentGu, a senior analyst at iSuppli who specializes in the Chinese market, points out that Chinese LED manufacturers lack technical content, management team experience and research and development staff in the production process compared to the US and Taiwan's rivals, but China has government from the government. The strong financial support allows them to take a slice of this demanding market. The Chinese government is responsible for at least 70% of the expenses, or an average of 1.5 million for each machine purchased for metalorganic chemical vapor deposition (MOCVD) (for LED production). Furthermore, the local government will use the tax and utility benefits of the people to support the development of LED.

iSuppli is optimistic that the government's financial support will stimulate Chinese LED producers to spend an additional $3.5 billion annually on LED-related production equipment between 2010 and 2012. This overhead enables producers to solve technical problems, including lack of intellectual property, production equipment and lack of LED chips.

Gu also added that with such large capital expenditures and foreseeable technological advances in the next few years, Chinese LED producers can enter the global market as strong competitors after 2015.

LED market prospects diversify

The domestic LED market covers a wide range of LED displays, street lights, general lighting, traffic signals, and LED displays for mobile phone keypads, digital cameras, large LCD TV displays, laptops and other displays. China's LCD backlight application market share will reach 1.2 billion US dollars in 2014, compared with 468 million in 2010.

A new demand has emerged that will push the development of LEDs to a more stable and long-term direction. It is comprehensive lighting. The world is working to reduce carbon dioxide emissions, which indirectly continually drives the demand for more energy-efficient and low-consumption LEDs, as well as in the overall lighting market. iSuppli estimates that in 2010, the overall lighting market accounted for 18.4% of the entire LED market.

3D printing on the pen machine is mainly used in 3 d printing pen, is made from a special custom Dc Gear Motor, mainly used in 3 d printing pen, pen 3 d printing machine has been updated three generations according to the requirements of product.

3D Printing Motor product introduction:

The 3D Printing Motor is based on the deceleration Motor, coupled with supporting gears and ball bearings.The role of the gear reducer is to provide lower speed and greater torque.At the same time, gear box different deceleration ratio can provide different speed and torque.It's mostly rolling.

Features: 3D Printing Motor, small size, large torque, low noise, durable, low energy consumption, customized power design, convenient installation and maintenance;

Simplify design and save space.

Features: usually used financial equipment, office equipment, electronic locks, wireless charger, remote control toys, precision instruments and meters, automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows, etc., wide application range

Method of use: the best stable in horizontal plane, installed on the 3D Printing Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 3D Printing Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Operating temperature range:

3D Printing Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a 3D Printing Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

3D Printing Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

3D Printing Motor

3D Printing Motor,3D Printing Gear Motor,3D Printing Pen Motor,3D Printing Spindle Motor

Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com