OSRAM launches Duris S 8 for multi-chip LEDs for indoor lighting

OSRAM Opto Semiconductors introduces the new Duris S 8 , a multi-chip, high-power new force for the Duris S LED series. This LED is finely grouped and provides excellent color consistency when combined with high brightness. This new Duris S is mainly used for directional and multi-directional replacement luminaires for indoor lighting, as well as for LED projection lamps; it is particularly suitable for directional lighting in office and commercial environments, as well as for home lighting.

This fine-grained grouping of LEDs corresponds to the coverage of the 5-step MacAdam ellipse, so that excellent color consistency (color sorting) can be achieved in directional replacement lamps. If the requirements for color homogeneity are high, an additional third-order MacAdam cluster can be provided. Duris S 8 is grouped according to color coordinates at a junction temperature of 100 °C, rather than the usual room temperature. Janick Ihringer, product manager for solid-state lighting at OSRAM Opto Semiconductors in Germany, said: "In terms of color rendering, Duris S 8 has a color rendering index of over 80. The next phase of the task is to further increase the color rendering index."

The new Duris S also emits a lot of light from a small surface, creating a highly efficient optical solution. The product size is only 5.8 x 5.2 mm and is available in two versions, six or eight. Directional replacement luminaires are available in an eight-chip version thanks to a brightness of 500 lm at 200 mA.

Ihringer added: "Small, low-cost drive modules for 20 to 30V forward voltage are available. In addition, they have many excellent technical features such as a lifetime of up to 25,000 hours or 110 °C. Operating at operating temperatures, it is especially suitable for target applications."

The Duris S 8 also reduces the system cost of the lighting system. The Duris S package contains an innovative plastic housing that is not only resistant to aging under high temperature and short-wave conditions, but also cost less than conventional ceramic housings.

Metal Film Resistor is Film resistor (Film Resistors) of a kind.It is the high temperature vacuum coating technology will be closely attached to the porcelain nickel chromium alloy or similar bar surface skin membrane, after debugging cutting resistance, in order to achieve the final requirements precision resistance, then add appropriate joint cutting, and on its surface coated with epoxy resin sealing protection.As it is a lead resistance, it is convenient for manual installation and maintenance, and is used in most household appliances, communications, instruments and instruments.

Metal Film Resistors

Metal Film Resistors,2W Metal Film Resistors,3W Metal Film Resistor,5W Metal Film Resistor

YANGZHOU POSITIONING TECH CO., LTD , https://www.yzpstcc.com