LED industry strong momentum of integration

In 2014, LED lighting will play a major role in wafer growth, and the output value will be almost equal to the LED backlight. However, the competition from Chinese and Korean manufacturers will remain undiminished. In the next two years, the LED industry will continue to see horizontal or vertical consolidation. It will also continue to decline, and wafer manufacturers can only respond to lower costs. Jianpeng, chairman of the board, said when attending an open event, the LED lighting output value will double in 2014, and the automotive LED will become the main force to drive the demand for chips. The output value of NB and smart phone backlight sources is only expected to be flat. He estimates that next year the LED backlight and LED lighting will have a production ratio of one to one, and in 2015 it will grow to be twice that of the backlight.

Although the demand for LED lighting in 2014 was amazing, the overall LED industry continued to be under price pressure. Jian Feng was an example. In the past two years, the LED industry has actively replaced the 60-watt tungsten light bulb. The price of LED has fallen from US$40 to US$20. Once again, it dropped to 10 US dollars. At this stage, the price has not yet stopped. In addition to price pressure, the strong competition from LED plants in China and Korea is a greater challenge for Taiwanese companies.

Jianfeng assumes that in the next two years, the LED industry will not be able to hold the tide. In addition to the integration of the upper, middle, and lower reaches, integration with the industry may also occur. It is like the past paper industry, from the initial 20 to 30 consolidations. At present, under the pressure of price, Taiwanese companies can only continue to reduce costs.

Jian Fengren said that the wafer factory must improve its product design and manufacturing process, use the smallest amount of materials to make high-efficiency LEDs, and package-free chips and high-voltage HVLEDs are expected to become the two major trends. In particular, HVLED can replace the power supply with one IC. The driver, not only prolongs the service life, the wafer accounts for 30% of the cost of the LED bulb and can be reduced to 20%. With current technology, 200 lumens products per watt can already be made.

Looking forward to 2014, Jianfeng Ren said that the economy will show upward volatility, and the chip ASP may still maintain this year's decline, which is about 10%.

Features: 12v Dc geared motor drive precision, small volume, large torque, low noise, durability, low energy consumption, customized power design,easy installation, easy maintenance;Simplify design and save space.

12V Dc Gear Motor, namely Gear Reduction Motor, is based on ordinary Dc Motor, coupled with gear reduction gearbox.

The gear reducer is used to provide low speed and large torque.

At the same time, the gearbox with different deceleration ratio can provide different speed and torque.

Generally different industries, using different power dc motor, generally adopt custom parameter design pattern.

Method of use: the best stable in horizontal plane, installed on the 12v dc gear motor output shaft parts, cannot use a hammer to knock,knock prone to press into the 12v dc gear motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Operating temperature range:

12v Dc geared motors should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

12v Dc geared motors should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

         

when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant  with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department  to service to you Looking forward to your inquiry. Welcome to our factory.

12v Dc Gear Motor

12V Dc Gear Motor,Dc Gear Motor 12V,12V Gear Motor,12V Dc Gear Motor 30 RPM

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com