PCB Board 6 Layer Copper Thick 1 oz Copper Board
Model NO.: BIC-229-V2.29
Processing Technology: Electrolytic Foil
Base Material: Copper
Insulation Materials: Epoxy Resin
Outer Copper Foil: 1 Oz
Board Thickness: 1.6mm
Surface Treament: HASL Lead Free
Solder Mask: Green
Legend: White
Electrical Test: 100% PCB Passed
Visual Inspection: Ipc-a-600h&Ipc-6012c
Solderability Test: 245ºC 5s 1 Cycle
Min Line Width (Mil): 7.2 Mil
Min Line Spacing (Mil): 5.2 Mil
Trademark: Bicheng Enterprise Limited
Transport Package: Vacuum
Specification: 248.60x 109.86mm=20PCS
Origin: China
HS Code: 8534001000
Model NO.: BIC-229-V2.29
Processing Technology: Electrolytic Foil
Base Material: Copper
Insulation Materials: Epoxy Resin
Outer Copper Foil: 1 Oz
Board Thickness: 1.6mm
Surface Treament: HASL Lead Free
Solder Mask: Green
Legend: White
Electrical Test: 100% PCB Passed
Visual Inspection: Ipc-a-600h&Ipc-6012c
Solderability Test: 245ºC 5s 1 Cycle
Min Line Width (Mil): 7.2 Mil
Min Line Spacing (Mil): 5.2 Mil
Trademark: Bicheng Enterprise Limited
Transport Package: Vacuum
Specification: 248.60x 109.86mm=20PCS
Origin: China
HS Code: 8534001000
Prototype PCB 6 Layer Round PSR-2000GT600D Green Solder Mask and HASL PCB in RfSwitches
Commodity Introduction
This is a type of FR-4 PCB for the application of Rf Switches. It's a 6 layer board at 1.6mm
thick.The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated
per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately.Â
Parameters & Data Sheet
| Item | Requirement | Result | |
| Laminate | Type | FR-4Â TG170 | FR-4Â TG170 |
| Supplier | ITEQ | ITEQ | |
| Board thickness | 1.6+/-10%mm | 1.52-1.55 | |
| Outer copper foil | >=35 um | 43.84 | |
| Inner copper foil | 1/1 OZ | 1/1 OZ | |
| Warp-twist | <=Â 1% | 0.09% | |
| Legend | Type | IJR-4000Â MW300 | IJR-4000Â MW300 |
| Color | White | White | |
| Location | CSÂ | CS | |
| Marking | Co.logo | YES | OK |
| UL.logo | YES | OK | |
| Date code | WWYY | WWYY | |
| Marking form | NA  | OK | |
| Location | CS | CSÂ | |
| Min line width (mil) | 7 | 7.2 | |
| Min line spacing (mil) | 5.4 | 5.2 | |
| Min ring width (mil) | NA  | NA  | |
| Solder Mask | Type | PSR-2000GT 600D | PSR-2000GT 600D |
| Color | Green | Green | |
| Thickness | >=10Â um | 13Â um | |
| Pencil Test | 6H OR ABOVE | OK | |
| SOLVENTÂ TEST | NOÂ ATTACK | OK | |
| TAPEÂ TESTÂ | NOÂ PEELÂ OFF | OK | |
| Surface Treament | HASL Lead free | OK | |
| Special Treament | Silk screen | / | / |
| Location | / | / | |
| Forming | V-cut | OK | |
| Normal Testing | Electrical test | 100% PCB passed | OK |
| Visual inspection | IPC-A-600H&IPC-6012C | OK | |
| Solderability Test |  245ºC 5S 1 Cycle | OK | |
Finished dimension (unit: mm): including v-cut
| No | Required Dimension (tolerance) | Actual Dimension | |||
| 1 | 248.60Â | 248.47Â | 248.56Â | 248.71Â | 248.57Â |
| 2 | 109.86Â | 109.81Â | 109.91 | 109.97Â | 109.97Â |
Hole size and slot dimension(unit: mm, PTH tolerance +/-0.076, NPTH +/-0.05mm)
| No | Required | PTH | Actual Dimension | |||
| 1 | 0.600Â | Y | 0.600Â | 0.575Â | 0.625Â | 0.600Â |
| 2 | 0.850Â | Y | 0.850Â | 0.825Â | 0.875Â | 0.850Â |
| 3 | 0.900Â | Y | 0.900Â | 0.875Â | 0.925Â | 0.900Â |
| 4 | 1.320Â | Y | 1.320Â | 1.295Â | 1.345Â | 1.320Â |
| 5 | 1.600Â | Y | 1.600Â | 1.575Â | 1.625Â | 1.600Â |
| 6 | 2.540Â | Y | 2.550Â | 2.525Â | 2.575. | 2.550Â |
| 7 | 3.500Â | N | 3.500Â | 3.500Â | 3.525Â | 3.500Â |
Learn PCB and Buy PCB
PCB fabrication process Â
1). Etching
Purpose: Etching is to etch off the non-circuit parts of the copper layer by chemical reaction method
Â
2). Solder MaskÂ
Purpose: Solder mask is transferring the solder mask film graphics to the board to protect the track
and prevent the track from the effect of tin welding during assembly.
Â
3). Silkscreen
Purpose: The silkscreen character is a mark that is easy to recognize.
Â
4). Edge connector plating (Gold finger)
Purpose: A nickel gold layer with a thickness is plated on the PCB edge of the plug to make it more
resistant to wear.
Â
HASL (a process of coordinate)
HASL is a layer of tin generated on the non-solder mask area to protect pad copper surface from
oxidation to ensure good welding performance.
Â
5). Contour
Purpose: By stamping or milling machine to cut the PCB into customers' required shape.
Â
6). Electrical test
Purpose: Through the electronic 100% test to find the open circuit, short circuit and other functional
defects which are not easy to find by visual inspection.
Â
7). Final Inspection
Purpose: Through 100% visual inspection to find out the defects in appearance and repair minor
defects to avoid problems and defects in the shipment.
Prototype PCB 6 Layer Round PSR-2000GT600D Green Solder Mask and HASL PCB in RfSwitches
Commodity Introduction
This is a type of FR-4 PCB for the application of Rf Switches. It's a 6 layer board at 1.6mm
thick.The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated
per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately.Â
Parameters & Data Sheet
| Item | Requirement | Result | |
| Laminate | Type | FR-4Â TG170 | FR-4Â TG170 |
| Supplier | ITEQ | ITEQ | |
| Board thickness | 1.6+/-10%mm | 1.52-1.55 | |
| Outer copper foil | >=35 um | 43.84 | |
| Inner copper foil | 1/1 OZ | 1/1 OZ | |
| Warp-twist | <=Â 1% | 0.09% | |
| Legend | Type | IJR-4000Â MW300 | IJR-4000Â MW300 |
| Color | White | White | |
| Location | CSÂ | CS | |
| Marking | Co.logo | YES | OK |
| UL.logo | YES | OK | |
| Date code | WWYY | WWYY | |
| Marking form | NA  | OK | |
| Location | CS | CSÂ | |
| Min line width (mil) | 7 | 7.2 | |
| Min line spacing (mil) | 5.4 | 5.2 | |
| Min ring width (mil) | NA  | NA  | |
| Solder Mask | Type | PSR-2000GT 600D | PSR-2000GT 600D |
| Color | Green | Green | |
| Thickness | >=10Â um | 13Â um | |
| Pencil Test | 6H OR ABOVE | OK | |
| SOLVENTÂ TEST | NOÂ ATTACK | OK | |
| TAPEÂ TESTÂ | NOÂ PEELÂ OFF | OK | |
| Surface Treament | HASL Lead free | OK | |
| Special Treament | Silk screen | / | / |
| Location | / | / | |
| Forming | V-cut | OK | |
| Normal Testing | Electrical test | 100% PCB passed | OK |
| Visual inspection | IPC-A-600H&IPC-6012C | OK | |
| Solderability Test |  245ºC 5S 1 Cycle | OK | |
Finished dimension (unit: mm): including v-cut
| No | Required Dimension (tolerance) | Actual Dimension | |||
| 1 | 248.60Â | 248.47Â | 248.56Â | 248.71Â | 248.57Â |
| 2 | 109.86Â | 109.81Â | 109.91 | 109.97Â | 109.97Â |
Hole size and slot dimension(unit: mm, PTH tolerance +/-0.076, NPTH +/-0.05mm)
| No | Required | PTH | Actual Dimension | |||
| 1 | 0.600Â | Y | 0.600Â | 0.575Â | 0.625Â | 0.600Â |
| 2 | 0.850Â | Y | 0.850Â | 0.825Â | 0.875Â | 0.850Â |
| 3 | 0.900Â |
| ||||